Bibliografija IJS za leto 2007

BILIOGRAFIJA IJS ZA LETO 2007

Odsek za tanke plasti in površine (F3)

ČLANKI IN DRUGI SESTAVNI DELI

1.01 Izvirni znanstveni članek

1. Árpád Barna, László Kotis, Zoltán Osváth, Attila L. Tóth, Miklós Menyhárd, Anton Zalar, Peter Panjan, "Ion beam mixing by focused ion beam", J. appl. phys., vol. 102, no. 5, str. 053513-1-053513-7, 2007. [COBISS.SI-ID 21330983]

2. Milan Bizjak, Anton Zalar, Peter Panjan, Benjamin Zorko, Borut Praček, "Characterization of iron oxide layers using Auger electron spectroscopy", Appl. surf. sci., vol. 253, str. 3977-3981, 2007. [COBISS.SI-ID 20544807]

3. Miha Čekada, Peter Panjan, Janez Dolinšek, Anton Zalar, Z. Medunić, M. Jaksić, Nikola Radić, "Diffusion during annealing of Al/Cu/Fe thin films", Thin solid films, vol. 515, str. 7135-7139, 2007. [COBISS.SI-ID 20767527]

4. Miha Čekada, Peter Panjan, Darja Kek-Merl, Matjaž Panjan, Gregor Kapun, "SEM study of defects in PVD hard coatings", Vacuum, vol. 82, no. 2, str. 252-256, 2007. [COBISS.SI-ID 21146663]

5. Biljana Gaković, Milan Trtica, Dimitri Batani, Peter Panjan, D. Vasiljević Radović, "Surface modification of titanium nitride film by a picosecond Nd: Yag laser : [presented at Photon06 conference on 4-7 September at the University of Manchester, UK]", J. opt. A, Pure appl. opt. (Print), vol. 9, no. 6, str. S76-S80, 2007. [COBISS.SI-ID 20901927]

6. Valentina Gečevska, Peter Panjan, "Light cardboard production process and cutting tool life improvement", Adv produc engineer manag, vol. 2, no. 3, str. 113-126, 2007. [COBISS.SI-ID 20876327]

7. Đurđica Goršćak, Peter Panjan, Miha Čekada, Lidija Ćurković, "Comparison of mechanical properties of various PVD hard coatings for forming tools", Surf. eng., vol. 23, no. 3, str. 177-182, 2007. [COBISS.SI-ID 20800295]

8. Darja Kek-Merl, Peter Panjan, Matjaž Panjan, Miha Čekada, "The role of surface defects density on corrosion resistance of PVD hard coatings : [presented at 10th International Conference on Plasma Surface Engineering, PSE2006]", Plasma processes polym. (Print), vol. 4, issue S1, str. S613-S617, 2007. [COBISS.SI-ID 20922663]

9. L. Kotis, M. Menyhard, L. Toth, Anton Zalar, Peter Panjan, "Determination of relative sputtering yield of Cr/Si", Vacuum, vol. 82, no. 2, str. 178-181, 2007. [COBISS.SI-ID 21146919]

10. Janez Kovač, Peter Panjan, Anton Zalar, "XPS analysis of W[sub]xC[sub]y thin films prepared by sputter deposition", Vacuum, vol. 82, no. 2, str. 150-153, 2007. [COBISS.SI-ID 21147687]

11. Matjaž Panjan, Miha Čekada, Peter Panjan, Tomaž Peterman, "Computer simulation of multilayer structure of TiAlN/CrN coatings : [presented at 10th International Conference on Plasma Surface Engineering, PSE2006]", Plasma processes polym. (Print), vol. 4, issue S1, str. S921-S926, 2007. [COBISS.SI-ID 20922407]

12. Matjaž Panjan, Sašo Šturm, Peter Panjan, Miha Čekada, "TEM investigation of TiAlN/CrN multilayer coatings prepared by magnetron sputtering", Surf. coat. technol., vol. 202, str. 815-819, 2007. [COBISS.SI-ID 21247783]

13. Peter Panjan, Miha Čekada, Janez Dolinšek, B. Vrtič, Anton Zalar, Darja Kek-Merl, "Diffusion processes during heat treatment of Al-Cr-Fe thin films", Vacuum, vol. 82, no. 2, str. 286-289, 2007. [COBISS.SI-ID 21146407]

14. Anton Zalar, Janez Kovač, Borut Praček, Peter Panjan, Miran Čeh, "Ion sputtering rates of C, Cr[sub]xC[sub]y, and Cr at different Ar[sup]+ ion incidence angles", Vacuum, vol. 82, no. 2, str. 116-120, 2007. [COBISS.SI-ID 20963367]

1.04 Strokovni članek

1. Miha Čekada, Markhus Kahn, Wolfgang Waldhauser, "Anodni ionski izvir", Vakuumist, letn. 27, št. 4, str. 20-22, 2007. [COBISS.SI-ID 21509671]

2. Peter Panjan, "Zaščita komponent in strojnih delov s trdimi prevlekami", IRT 3000, letn. 2, št. 3, str. 82-93, 2007. [COBISS.SI-ID 20876583]

3. Peter Panjan, "Zaščita strojnih delov s trdimi PVD-prevlekami", IRT 3000, letn. 2, št. 3, str.82-93, 2007. [COBISS.SI-ID 20875559]

1.06 Objavljeni znanstveni prispevek na konferenci (vabljeno predavanje)

1. Aleš Petek, Bojan Podgornik, Karl Kuzman, Miha Čekada, W. Waldhauser, Jože Vižintin, "The analysis of tribological process during incremental sheet metal forming", V: Proceedings of the 3rd International Conference on Tribology in Manufacturing Processes, Yokohama, Japan, September 24-26, 2007 : ICTMP 2007, Akira Azushima, ur., Yokohama, Japan, Department of Mechanical Engineering, Faculty of Engineering, cop. 2007, str. 19-24. [COBISS.SI-ID 10191131]

1.08 Objavljeni znanstveni prispevek na konferenci

1. Marta Klanjšek Gunde, Matjaž Kunaver, Miha Čekada, "The influence of surface texture parameters on specular gloss of powder coatings", V: Visual appearance : proceedings of the CIE expert symposium, 19-20 October 2006, Paris, France, (CIE, no. x032:2007), Austria, Commission internationale de l'éclairage, CIE Central Bureau, 2007, str. 76-82. [COBISS.SI-ID 3751450]

2. Matjaž Panjan, Miha Čekada, Peter Panjan, Anton Zalar, Tomaž Peterman, "Sputtering simulation of multilayer coatings in industrial PVD system with three-fold rotation", V: Proceedings of the 11th joint vacuum conference (JVC-11) : Prague, Czech Republic, 24-28 September 2006, (Vacuum, Vol. 82, Issue 2, 2007), Vladimír Matolín, ur., Oxford, New York, Pergamon Press, 2007, vol. 82, no. 2, str. 158-161, 2007. [COBISS.SI-ID 21147431]

3. Muriel Sales, Miha Čekada, Janez Dolinšek, (8 avtorjev), "Cold welding and fretting tests on quasicrystal coating under vacuum", V: Proceedings, (SP, 616), The 10th International Symposium on Materials in a Space Environment & The 8th International Conference on Procetion of Materials and Structures in a Space Environment, 19-23 June 2006, Collioure, France, B. Battrick, ur., Noordwijk, European Space Agency, 2006, 7 str. [COBISS.SI-ID 21084199]

4. Alenka Vesel, Aleksander Drenik, Miran Mozetič, Anton Zalar, Marianne Balat-Pichelin, Marjan Bele, "AES investigation of the stainless steel surface oxidized in plasma", V: Proceedings of the 11th joint vacuum conference (JVC-11) : Prague, Czech Republic, 24-28 September 2006, (Vacuum, Vol. 82, Issue 2, 2007), Vladimír Matolín, ur., Oxford, New York, Pergamon Press, 2007, vol. 82, no. 2, str. 228-231, 2007. [COBISS.SI-ID 20985127]

1.09 Objavljeni strokovni prispevek na konferenci

1. Peter Panjan, "Uporaba plazemskega inženirstva površin v avtomobilski industriji", V: Cimosov forum : 3. zbornik referatov, 16. november 2007, Koper, Cimos, 2007, str. 351-354. [COBISS.SI-ID 21247527]

2. Peter Panjan, Srečko Paskvale, Miha Čekada, Matjaž Panjan, Darja Kek-Merl, "Študij topografije površine orodnih jekel po mehanski predpripravi in po nanosu PVD-prevlek", V: Orodjarne v svetu globalne sposobnosti : dobavitelj - kupec - orodjar : zbornik posvetovanja, Portorož, 09.-11. oktober 2007, Andrej Polajnar, ur., Janez Poje, ur., Mihael Junkar, ur., Ljubljana, GZS, Združenje kovinske industrije, Odbor za orodjarstvo, v Mariboru, Fakulteta za strojništvo, 2007, str. 163-167. [COBISS.SI-ID 21146151]

3. Franc Setnikar, Marica Tonkovič-Prijanovič, Peter Panjan, "Analysis of millers protected with hard PVD coatings", V: Technical creativity in school's curricula with the form of project learning "From idea to the product" : from the kindergarten to the technical faculty : proceedings : 5th International science symposium : od vrtca do fakultetnega tehniškega študija : zbornik prispevkov : 5. Mednarodni znanstveni posvet, 18.-20. april 2007, Portorož, Slovenia, Jožica Bezjak, ur., Ljubljana, Somaru, 2007, str. 92-98. [COBISS.SI-ID 701279]

1.12 Objavljeni povzetek znanstvenega prispevka na konferenci

1. Matjaž Panjan, Sašo Šturm, Peter Panjan, Miha Čekada, "TEM study of TiAlN/CrN nanolayer coatings", V: Programme and the book of abstracts, Ninth Annual Conference of the Yugoslav Materials Research Society YUCOMAT 2007, Herceg Novi, September 10-14, 2007, Dragan P. Uskoković, ur., Belgrade, Institute of Technical Sciences of SASA, 2007, str. 36. [COBISS.SI-ID 21424423]

1.20 Predgovor, spremna beseda

1. Peter Panjan, "Zaščita komponent in strojnih delov s trdimi prevlekami : uvodnik", IRT 3000, letn. 2, št. 3, str. 81, 2007. [COBISS.SI-ID 20875303]

MONOGRAFIJE IN DRUGA ZAKLJUČENA DELA

2.13 Elaborat, predštudija, študija

1. Ingrid Milošev, Edita Blaževič, Peter Panjan, Darja Kek-Merl, Jožko Fišer, Fourth quarter report of the project "PVD coatings for protection of aluminium-based substrates for aircraft applications", (IJS delovno poročilo, 9667, confidential), 2007. [COBISS.SI-ID 21083175]

2. Ingrid Milošev, Edita Blaževič, Peter Panjan, Darja Kek-Merl, Jožko Fišer, Third quarter report of the project "PVD coatings for protection of aluminium-based substrates for aircraft applications", (IJS delovno poročilo, 9666, confidential), 2007. [COBISS.SI-ID 21082919]

3. Peter Panjan, Darja Kek-Merl, Jožko Fišer, Ingrid Milošev, Edita Blaževič, Final quarter report of the project "PVD coatings for protection of aluminium-based substrates for aircraft applications", (IJS delovno poročilo, 9668, confidential), 2007. [COBISS.SI-ID 21126695]

4. Peter Panjan, Darja Kek-Merl, Jožko Fišer, Ingrid Milošev, Edita Blaževič, The first quarter report of the project "PVD coatings for protection of aluminium-based substrates for aircraft applications", (IJS delovno poročilo, 9664, confidential), 2007. [COBISS.SI-ID 21082663]

5. Peter Panjan, Darja Kek-Merl, Jožko Fišer, Ingrid Milošev, Edita Blaževič, The second quarter report of the project "PVD coatings for protection of aluminium-based substrates for aircraft applications", (IJS delovno poročilo, 9665, confidential), 2007. [COBISS.SI-ID 21080615]

SEKUNDARNO AVTORSTVO

Urednik

1. Peter Panjan, ur., Zaščita komponent in strojnih delov s trdimi PVD-prevlekami, (IRT 3000, Let. 2, št. 3, 2007), Školjica, Profidtp, 2006. [COBISS.SI-ID 20875047]

2. Euroteh, Panjan Peter (član uredniškega sveta 2004-), Trzin, Intehna, 2004-, ISSN 1581-8608, http://www.euroteh.com/. [COBISS.SI-ID 128797696]

3. IRT 3000, Panjan Peter (član uredniškega sveta 2006-), Škofljica, Profidtp, 2006-, ISSN 1854-3669. [COBISS.SI-ID 223154432]

4. Materiali in tehnologije, Panjan Peter (član uredniškega odbora 2002-), Ljubljana, Inštitut za kovinske materiale in tehnologije, 2000-, ISSN 1580-2949, http://www.imt.si/materiali-tehnologije/. [COBISS.SI-ID 106193664]

5. Vakuumist, Panjan Peter (glavni in odgovorni urednik 1991-), Vesel Alenka (član uredniškega odbora 2004-), Ljubljana, Društvo za vakuumsko tehniko Slovenije, 1981-, ISSN 0351-9716, http://www2.arnes.si/~ljdvts/slo/arhiv.htm. [COBISS.SI-ID 16059650]

Komentor pri diplomskih delih

1. Darjan Cimprič, Difuzijski procesi med pregrevanjem večplastnih struktur sistema Al-Cr-Fe : diplomsko delo, Ljubljana, [D. Cimprič], 2007. [COBISS.SI-ID 2028132]

2. Srečko Paskvale, Ionsko jedkanje orodnih materialov pred nanosom trdnih prevlek : diplomsko delo, Ljubljana, [S. Paskvale], 2007. [COBISS.SI-ID 2013028]

27. 6. 2008

Spletni mojster: av