Bibliografija IJS za leto 2004

BILIOGRAFIJA IJS ZA LETO 2004

Odsek za tanke plasti in površine (F3)

ČLANKI IN DRUGI SESTAVNI DELI

1.01 Izvirni znanstveni članek

1. Miha Čekada, Peter Panjan, Dalija Jurić, Janez Dolinšek, Anton Zalar, "Deposition and characterisation of Al-Cu-Fe thin films", Thin solid films, vol. 459, str. 267-270, 2004. [COBISS.SI-ID 18327591]

2. Leszek A. Dobrzański, M. Polok, Peter Panjan, S. Bugliosi, Marcin Adamiak, "Improvement of wear resistance of hot work steels by PVD coatings deposition : presented at 2nd International Conference on Advances in Materials and Processing Technologies, 7-12 december 2003, Singapore, Asia", J. mater. process. technol., vol. 155-156, str. 1995-2001, 2004. [COBISS.SI-ID 18666279]

3. Biljana Gaković, Milan Trtica, Peter Panjan, Miha Čekada, "Surface modification of the Cr-based coatings by the pulsed TEA CO[sub]2 laser", Appl. phys., A, Mater. sci. process. (Print), vol. 79, str. 1353-1355, 2004. [COBISS.SI-ID 18576935]

4. Darinka Kek, Peter Panjan, Miha Čekada, Marijan Maček, "The corrosion behavior of Cr-(C,N) PVD hard coatings deposited on various substrates", Electrochim. acta, vol. 49, str. 1527-1533, 2004. [COBISS.SI-ID 18088743]

5. Jyrki Lappalainen, Darinka Kek, Harry L. Tuller, "High carrier density CeO[sub]2 dielectrics - implications for MOS devices : presented at 8th International Conference on Electronic Ceramics and their Applications, August 25-28,2002, Rome, Italy", J. Eur. Ceram. Soc., vol. 24, str. 1459-1462, 2004. [COBISS.SI-ID 18047271]

6. Marijan Maček, Miha Čekada, "Energy and mass spectroscopy studies during ion plating of hard coatings", Surf. coat. technol., vol. 180-181, str. 2-8, 2004. [COBISS.SI-ID 18176039]

7. Peter Panjan, Miha Čekada, R. Kirn, Mirko Soković, "Improvement of die-casting tools with duplex tretment", Surf. coat. technol., vol. 180-181, str. 561-565, 2004. [COBISS.SI-ID 18168615]

8. Mirko Soković, Peter Panjan, R. Kirn, "Possibilities of improvement of dies casting tools with duplex treatment : presented at Achievements in Mechanical and Materials Engineering Conference", J. mater. process. technol., vol. 157-158, str. 613-616, 2004. [COBISS.SI-ID 18691879]

9. Jan Suchánek, Peter Jurči, Peter Panjan, "Wear resistance of duplex coated P/M vanadis 6 cold work tool steel", Tribologia, vol. 23, str. 23-31, 2004. [COBISS.SI-ID 18577191]

1.04 Strokovni članek

1. Miha Čekada, Peter Panjan, "Merjenje poroznosti tankih plasti", Vakuumist, let. 24, št. 1-2, str. 53-54, 2004. [COBISS.SI-ID 18439719]

2. Miha Čekada, Peter Panjan, "Laserski postopki zaščite površin", Vakuumist, let. 24, št. 4, str. 4-10, 2004. [COBISS.SI-ID 18915623]

3. Peter Panjan, "Zaščita orodij za preoblikovanje pločenive s trdimi zaščitnimi prevlekami. 2. del", Vakuumist, let. 24, št. 1-2, str. 19-25, 2004. [COBISS.SI-ID 18438695]

4. Peter Panjan, Miha Čekada, "Zaščita orodij in strojnih delov s kombinacijo različnih postopkov inženirstva površin", Vakuumist, let. 24, št. 3, str. 14-17, 2004. [COBISS.SI-ID 18666791]

5. Peter Panjan, Miha Čekada, "Tribološke lastnosti trdih zaščitnih prevlek", Vakuumist, let. 24, št. 4, str. 11-17, 2004. [COBISS.SI-ID 18916135]

6. Peter Panjan, Miha Čekada, "Zakaj pri vakuumskem nanašanju tankih plasti potrebujemo visoki vakuum?", Vakuumist, letn. 24, št. 4, str. 33-34, dec. 2004. [COBISS.SI-ID 221314560]

7. Zoran Samardžija, Miran Čeh, Peter Panjan, Miha Čekada, "Mikrostrukturna karakterizacija trdih prevlek (Ti,Al)N in Cr(C,N)", Vakuumist, let. 24, št. 4, str. 21-23, 2004. [COBISS.SI-ID 18916647]

1.08 Objavljeni znanstveni prispevek na konferenci

1. Peter Panjan, Miha Čekada, Marijan Maček, Anton Zalar, "Low temperature sputter deposited PVD hard coatings", V: 6th Symposium of European Vacuum Coates : Anzio 2004 : Sept.27th - Sept.29th 2004, Anzio (Rome) Italy, [S.l., s.n.], 2004, 8 str. [COBISS.SI-ID 18524967]

2. Mirko Soković, Peter Panjan, Robert Kirn, "Duplex treatment - technology for improvement of dies casting tools", V: Manufacturing and management in 21st century : conference proceedings, Scientific Conference with International Participation, Ohrid, September 16-17, 2004, Republic of Macedonia, Vladimir Dukovski, ur., Ljuben Dudeski, ur., Radmil Polenakovik, ur., Jasmina Čalovska, ur., Skopje, Production and Industrial Engineering Association, 2004, chapter one, str. 321-324. [COBISS.SI-ID 7530011]

3. Marko Uplaznik, Aleš Mrzel, Daniel Vrbanič, Peter Panjan, Boštjan Podobnik, Dragan Mihailović, "Conducting properties of single bundles of Mo[sub]6S[sub]3I[sub]6 nanowires", V: Electronic properties of synthetic nanostructures : XVIII International Winterschool/Euroconference on Electronic Properties of Novel Materials, Kirchberg, Tirol, Austria, 6-13 March 2004, (AIP conference proceedings, v. 723), Hans Kuzmany, ur., Melville, American Institute of Physics, 2004, str. 419-422. [COBISS.SI-ID 18599719]

1.09 Objavljeni strokovni prispevek na konferenci

1. Peter Panjan, Miha Čekada, "Zaščita orodij in strojnih delov s kombinacijo različnih postopkov inženirstva površin", V: Poti k novemu napredku : dobavitelj - kupec - orodjar : zbornik posvetovanja, Portorož, 12.-14. oktober 2004, Andrej Polajnar, ur., Janez Poje, ur., Mihael Junkar, ur., Ljubljana, GZS, Združenje kovinske industrije, Odbor za orodjarstvo, v Mariboru, Fakulteta za strojništvo, 2004, str. 197-202. [COBISS.SI-ID 19831847]

1.12 Objavljeni povzetek znanstvenega prispevka na konferenci

1. Arpad Barna, M. Menyhard, Anton Zalar, Peter Panjan, "Dependence of interface broadening on layer thickness", V: Program in knjiga povzetkov, 10. združena vakuumska konferenca [tudi] 11. srečanje slovenskih in hrvaških vakuumistov [in] 24. slovenski vakuumski simpozij, 28. september-2. oktober 2004, Portorož, Slovenija = 10th Joint Vacuum Conference [being also] 11th Meeting of Slovenian and Croatian Vacuum Scientists [and] 24th Slovenian Vacuum Symposium, September 28-October 2, 2004, Portorož, Slovenia, Miran Mozetič, ur., Janez Šetina, ur., Janez Kovač, ur., Ljubljana, Društvo za vakuumsko tehniko Slovenije, 2004, str. 33. [COBISS.SI-ID 18523943]

2. Miha Čekada, Janez Dolinšek, Peter Panjan, "Mechanical properties of Al-Cu-Fe films", V: Program in knjiga povzetkov, 10. združena vakuumska konferenca [tudi] 11. srečanje slovenskih in hrvaških vakuumistov [in] 24. slovenski vakuumski simpozij, 28. september-2. oktober 2004, Portorož, Slovenija = 10th Joint Vacuum Conference [being also] 11th Meeting of Slovenian and Croatian Vacuum Scientists [and] 24th Slovenian Vacuum Symposium, September 28-October 2, 2004, Portorož, Slovenia, Miran Mozetič, ur., Janez Šetina, ur., Janez Kovač, ur., Ljubljana, Društvo za vakuumsko tehniko Slovenije, 2004, str. 27. [COBISS.SI-ID 18523431]

3. Miha Čekada, Peter Panjan, Janez Dolinšek, Z. Medunić, M. Jaksić, Nikola Radić, "Diffusion and phase formation during annealing of Al/Cu/Fe thin films", V: IVC-16 (16th International Vacuum Congress) [also] ICSS-12 (12th International Conference on Solid Surfaces) [also] NANO-8 (8th International Conference on Nanometer-scale Science and Technology) [also] AIV-17 (17th Vacuum National Symposium), June 28 - July 2, 2004, Venice, Italy, [S.l.], IUVSTA - International Union for Vacuum Science, Technology and Applications, Assoziazione Italiana del vuoto, 2004, book 1, str. 208. [COBISS.SI-ID 18366503]

4. Slavko Dolinšek, Peter Panjan, "Applications of different coatings for improvement of the characteristics of DMLS Tools", V: EOS : for rapid success, International User Meeting 2004, 17.-19.5.04, Fuschlsee, Salzburg, [s.l.], [EOS], 2004, 11 str. [COBISS.SI-ID 7850779]

5. Pavo Dubček, Nikola Radić, Sigrid Bernstorff, K. Salamon, Peter Panjan, Miha Čekada, "Surface of sputter-deposited tungsten films", V: Program in knjiga povzetkov, 10. združena vakuumska konferenca [tudi] 11. srečanje slovenskih in hrvaških vakuumistov [in] 24. slovenski vakuumski simpozij, 28. september-2. oktober 2004, Portorož, Slovenija = 10th Joint Vacuum Conference [being also] 11th Meeting of Slovenian and Croatian Vacuum Scientists [and] 24th Slovenian Vacuum Symposium, September 28-October 2, 2004, Portorož, Slovenia, Miran Mozetič, ur., Janez Šetina, ur., Janez Kovač, ur., Ljubljana, Društvo za vakuumsko tehniko Slovenije, 2004, str. 69. [COBISS.SI-ID 18524455]

6. Marijan Maček, Martin Mišina, Miha Čekada, Peter Panjan, "Energy-resolved mass spectroscopy during the deposition of TiN, Ti(CN) and TiC films by ion plating", V: Program in knjiga povzetkov, 10. združena vakuumska konferenca [tudi] 11. srečanje slovenskih in hrvaških vakuumistov [in] 24. slovenski vakuumski simpozij, 28. september-2. oktober 2004, Portorož, Slovenija = 10th Joint Vacuum Conference [being also] 11th Meeting of Slovenian and Croatian Vacuum Scientists [and] 24th Slovenian Vacuum Symposium, September 28-October 2, 2004, Portorož, Slovenia, Miran Mozetič, ur., Janez Šetina, ur., Janez Kovač, ur., Ljubljana, Društvo za vakuumsko tehniko Slovenije, 2004, str. 50. [COBISS.SI-ID 18524199]

7. Peter Panjan, Igor Bončina, Janez Bevk, Miha Čekada, "PVD hard coatings applied for wear protection of drawing die", V: Abstracts, Ninth International Conference on Plasma Surface Engineering, September 13-17,2004, Garmisch-Partenkirchen (Germany), [S.l.], VDI Technologiezentrum, 2004, str. 455. [COBISS.SI-ID 18523175]

8. Peter Panjan, Slavko Dolinšek, Magda Tušek-Žnidarič, Miha Čekada, "Improvment of laser sintered tools with PVD coatings", V: Abstracts, Ninth International Conference on Plasma Surface Engineering, September 13-17,2004, Garmisch-Partenkirchen (Germany), [S.l.], VDI Technologiezentrum, 2004, str. 424. [COBISS.SI-ID 18522919]

9. Peter Panjan, Robert Kos, Boris Navinšek, Miha Čekada, "Performance test of solid carbide slitting saw coated with PVD coatings", V: IVC-16 (16th International Vacuum Congress) [also] ICSS-12 (12th International Conference on Solid Surfaces) [also] NANO-8 (8th International Conference on Nanometer-scale Science and Technology) [also] AIV-17 (17th Vacuum National Symposium), June 28 - July 2, 2004, Venice, Italy, [S.l.], IUVSTA - International Union for Vacuum Science, Technology and Applications, Assoziazione Italiana del vuoto, 2004, book 2, str. 761. [COBISS.SI-ID 18365991]

10. Nikola Radić, Peter Panjan, Miha Čekada, (8 avtorjev), "Tugsten multilayers", V: IVC-16 (16th International Vacuum Congress) [also] ICSS-12 (12th International Conference on Solid Surfaces) [also] NANO-8 (8th International Conference on Nanometer-scale Science and Technology) [also] AIV-17 (17th Vacuum National Symposium), June 28 - July 2, 2004, Venice, Italy, [S.l.], IUVSTA - International Union for Vacuum Science, Technology and Applications, Assoziazione Italiana del vuoto, 2004, book 2, str. 744. [COBISS.SI-ID 18366247]

11. Mirko Soković, Peter Panjan, Robert Kirn, "Duplex treatment - technology for improvement of dies casting tools", V: Manufacturing and management in 21st century : book of abstracts, Scientific Conference with International Participation, Ohrid, September 16-17, 2004, Republic of Macedonia, Vladimir Dukovski, ur., Ljuben Dudeski, ur., Radmil Polenakovik, ur., Jasmina Čalovska, ur., Skopje, Production and industrial Engineering Association, 2004, str. 79. [COBISS.SI-ID 7532571]

12. Igor Urankar, Milan Terčelj, Peter Panjan, Radomir Turk, "Estimation of tool wear in laboratory hot forging condition", Metalurgija (Sisak), vol. 43, br. 3, str. 248, 2004. [COBISS.SI-ID 497503]

13. Anton Zalar, Janez Kovač, Borut Praček, Peter Panjan, "AES depth profiling and interface analysis of C/Ta bilayers", V: Program in knjiga povzetkov, 10. združena vakuumska konferenca [tudi] 11. srečanje slovenskih in hrvaških vakuumistov [in] 24. slovenski vakuumski simpozij, 28. september-2. oktober 2004, Portorož, Slovenija = 10th Joint Vacuum Conference [being also] 11th Meeting of Slovenian and Croatian Vacuum Scientists [and] 24th Slovenian Vacuum Symposium, September 28-October 2, 2004, Portorož, Slovenia, Miran Mozetič, ur., Janez Šetina, ur., Janez Kovač, ur., Ljubljana, Društvo za vakuumsko tehniko Slovenije, 2004, str. 35. [COBISS.SI-ID 18523687]

MONOGRAFIJE IN DRUGA ZAKLJUČENA DELA

2.05 Drugo učno gradivo

1. Peter Panjan, Zaščita orodij za preoblikovanje pločevine s trdimi zaščitnimi prevlekami, (Zbirka TECOS seminarji za plastiko, PČ 22), Celje, TECOS - Razvojni center orodjarstva Slovenije, 2004. [COBISS.SI-ID 18036007]

IZVEDENA DELA (DOGODKI)

3.16 Vabljeno predavanje na konferenci brez natisa

1. Slavko Dolinšek, Peter Panjan, Application of different coating for improvement of the characteristic of DMLS Tools : predavanje na international user meeting 2004, 17.-19.5.2004, Fuschlsee, Salzburg. [COBISS.SI-ID 7877659]

3.25 Druga izvedena dela

1. Members of the conference programme committee: Marija Kosec, Peter Panjan, MIDEM 2004, 40th International Conference on Microelectronics, Devices and Materials and the Workshop on Embedded Systems, September 29-October 01,2004 Slovenia, 2004. [COBISS.SI-ID 18811687]

2. Member of the International scientific committee: Peter Panjan, PSE 2004, Ninth International Conference on Plasma Surface Engineering, September 13-17,2004, Garmish-Partenkirchen, Germany, 2004. [COBISS.SI-ID 18599207]

SEKUNDARNO AVTORSTVO

Urednik

1. Stanislav Južnič, Peter Panjan, ur., Miha Čekada, ur., Zgodovina raziskovanja vakuuma in vakuumskih tehnik, Ljubljana, Društvo za vakuumsko tehniko Slovenije, 2004. [COBISS.SI-ID 215612416]

2. Euroteh, Panjan Peter (član uredniškega sveta 2004-), Trzin, Intehna, 2004-, ISSN 1581-8608, http://www.euroteh.com/. [COBISS.SI-ID 128797696]

3. Materiali in tehnologije, Panjan Peter (član uredniškega odbora 2002-), Ljubljana, Inštitut za kovinske materiale in tehnologije, 2000-, ISSN 1580-2949, http://www.imt.si/materiali-tehnologije/. [COBISS.SI-ID 106193664]

4. Vakuumist, Panjan Peter (glavni in odgovorni urednik 1991-), Vesel Alenka (član uredniškega odbora 2004-), Ljubljana, Društvo za vakuumsko tehniko Slovenije, 1981-, ISSN 0351-9716, http://www2.arnes.si/~ljdvts/slo/arhiv.htm. [COBISS.SI-ID 16059650]

Komentor pri magistrskih delih

1. Andrzej Piech, Mechanizmy zużycia tlenkowej ceramiki narzędziowej na bazie Al2O3 + TiC pokrytej cienkimi warstwami przeciwzużyciowymi : praca dyplomowa magisterska : instytut materialów inżynierskich i biomedycznych : wydzial mechaniczny technologiczny, politechnika ślaska w Gliwicah, Gliwice, [A. Piech], 2004. [COBISS.SI-ID 7329307]

Komentor pri diplomskih delih

1. Dalija Jurić, Gojenje tanke plsti kvazikristala Al62,5CU25FE12,5 v vakuumskem naprševalniku : diplomsko delo, Ljubljana, [D.Jurić], 2004. [COBISS.SI-ID 1724516]

3. 7. 2008

Spletni mojster: av